Sound & Volume Mixer and Control in Windows 10 In Windows 10 , if you click on the speaker icon, the volume control slider opens. You have to right-click on the speaker icon to see the following menu: set global volume to the maximum that you want. navigate to "balance" settings: open system settings, system, then sound. go to device properties. additional device properties (on the right) "levels" tab. balance button. pull any one of the unused channels all the way to 100 and leave the others where they are. The effects of clipping will be loss of treble and a dull, lifeless sound or added distortion. Should this be the case, turn your send level down until everything sounds right. Once you have this set, any return level controls can be turned up in conjunction with the master volume. This will help get the desired output volume from your amplifier. Right click on the sound icon found at the bottom right corner of the screen, then Open Sound settings. In Sound Settings, open the Sound Control Panel. The Sound control panel will appear, with four tabs at the top. Make sure Playback is selected. Right click on the default sound device, the one marked with a green check mark, and select Test. A compressor reduces the level of an audio signal if its amplitude exceeds a certain threshold. Threshold is commonly set in decibels (dBFS for digital compressors and dBu for hardware compressors), where a lower threshold (e.g. −60 dB) means a larger portion of the signal is treated. When the signal level is below the threshold, no Method 2 – Using the Audio Meters “Zero the mixer” – turn the channel gain, level and main mix knobs/faders all the way down. Set your microphone’s channel level to “unity” or zero (the position where you are neither adding volume or taking any away (attenuating)). .

setting sound system level controls